Commercial and industrial roofing across Yorkshire
Roofline is a commercial and industrial roofing contractor working across Yorkshire and the Humber, from Sheffield and Leeds to Hull and Teesside. Reactive repairs, planned maintenance, re-roofing and overcladding, metal cladding, single-ply and liquid systems, gutter lining and asbestos cement replacement, all planned around a building that has to keep working.
Roofing for buildings that have to keep working
Reactive repairs to full re-roofs, on shops, offices, warehouses, schools and farms across Yorkshire and the Humber: the Lower Don Valley, the Aire Valley and Leeds, the Calder Valley mills, Hull's docks, Teesside and the steelworks estates at Scunthorpe.
Commercial roof repairs and maintenance
Reactive repairs and planned maintenance for shops, offices, units and multi-let buildings.
Learn moreIndustrial roofing and re-roofing
Overclad and strip-and-replace options for warehouses, workshops and agricultural buildings.
Learn moreMetal roofing and cladding
Built-up and composite panel systems, wall cladding and flashings for steel-framed buildings.
Learn moreSingle-ply roofing (EPDM, TPO, PVC)
Fully adhered and mechanically fixed membranes for large flat roofs.
Learn moreLiquid-applied waterproofing and coatings
Cold-applied systems that extend the life of a roof without a full replacement.
Learn moreCut-edge corrosion treatment
Treat, prime and seal corroding sheet edges before they turn into leaks and replacements.
Learn moreIndustrial guttering and rainwater systems
Gutter lining, joint repairs, outlets and downpipes sized for large roof areas.
Learn moreAsbestos cement sheet replacement
Safe removal of asbestos cement roofing and replacement with modern sheeting.
Learn moreDifferent buildings, different pressures
A leaking roof over a shop floor, a classroom or a production line is not the same problem, and we do not treat it the same way.
Tell us what the building does and when it can be accessed, and we will plan the work around it rather than the other way round.
Landlords and managing agents
Portfolio maintenance, condition reports and one point of contact across several buildings.
Industrial and manufacturing
Re-roofing, cladding, gutters and rooflights on operating units, phased around production.
Schools, care and public buildings
Planned work in holidays and quiet periods, RAMS and DBS-checked operatives where required.
Retail and leisure
Flat roof membranes, liquid systems and repairs done out of hours to keep trading.
Agricultural
Asbestos cement replacement, fibre cement and metal sheeting on barns and stores.
Multi-site and regional portfolios
One contractor from Sheffield to Teesside: the same report format, the same standards and one invoice for estates spread across the region.
Questions from landlords, agents and facilities managers
Can you work while the premises stay operational?
Yes. Roofline plans commercial roofing across Yorkshire around the business, not the other way round. Work is phased in bays, the areas beneath are cordoned, and where the site needs it we work early, late or at weekends. Overcladding keeps the existing roof in place so the building stays dry throughout.
Do you provide RAMS, and what accreditations do you hold?
Risk assessments and method statements are issued before every commercial job, and we work to CDM 2015. Tell us what your pre-qualification process needs and we will send the paperwork over before we come on site.
What are your insurance limits?
Roofline holds public liability and employers' liability insurance. Call us and we will send the certificates through with the current limits on them.
Is the asbestos work licensed, and who carries out the removal?
Asbestos cement sheeting is normally non-licensed work under the Control of Asbestos Regulations 2012, carried out by trained operatives with controlled methods and licensed disposal. Where a survey finds material that needs licensed removal, a licensed contractor is brought in. The survey report tells you which applies to your building before any price is agreed.
Cut-edge corrosion: treat and coat, or replace?
Treat where the corrosion is confined to the edge and the sheet is sound; treat and coat where the sheet coating is failing too; replace sheets only where the edge has thinned or holed. Treated edges last 10 to 15 years and a full coating typically carries a 15 to 25 year guarantee. New sheets last longer but cost several times more.
Can you work out of hours or at weekends?
Yes, where the site needs it and it is agreed in the programme. Retail, schools and 24-hour operations often need this and it is priced into the quote from the start.
What does the guarantee cover on a coated or single-ply roof, and is it manufacturer-backed?
Established single-ply and liquid system manufacturers offer product guarantees of 10 to 25 years when the system is installed by an approved contractor to their specification. Ask us for our workmanship guarantee terms and the manufacturer approvals that apply to the specification you are considering, and we will put them in writing with the quote.
Tell us about the building
Size, use, what has prompted the call and when we can get on the roof. We will come out, survey it properly and send you a written report with costed options.
Book a site survey
Tell us about the building and we will arrange a survey at a time that suits the site.
